Showing posts with label resin tint. Show all posts
Showing posts with label resin tint. Show all posts

Thursday, November 15, 2012

NEEEEWWWWW BOARD!

Started working on this guy a couple of weeks ago when I scored a "second quality" longboard blank from Foam EZ. I basically wanted to make this one because Im not overly psyched on the longboard I made a few months ago: http://afedbearisadeadbear.blogspot.com/2012/08/new-longboard-done.html
The previous board just feels very stiff in that it's slow to turn and like to keep a straight line. I think this is mostly because I left the rails too thick, so they basically resist sinking down into turns a little more, and for a guy like me, lightweight, I would like some easier turns. the nose and tail on that board were too thick also, looking back at it....The board basically feels like riding a skateboard with tight trucks, and not that I hate this board, but I hate tight trucks. 
Regardless, this new one has a similar outline, but much thinner rails, somewhat bladed, throughout the whole thing. I made the concave under the nose a bit longer, just for aesthetics really though, made the nose and tail much thinner, and almost have a step deck effect. Without the fiberglass on it, the nose felt really flexy. Almost too flexy, and I got scared this would potentially fracture. maybe I'm wrong, but I ffigured I want this to last, so I ended up glassing it with two layers of 6 oz cloth on the bottom, whereas on the last longboard, I only used one layer of 6 oz. We will see how that feels! I also glassed in a tail patch for strength for the finbox. anyways, here's some pictures. 



 Sanding and getting close to being done with the sanding. Can't tell the outline very well from the angles I can get in the garage, but taking it through that door in and out seems like a good way to ding a foam core...

 Final sand, very rounded and almost hull-like bottom, with up rails big time in the back end. This will help the water suction up around the rail and suck the tail down when you're towards the front end of the board.

 Glassed the bottom last night! my tape wouldn't stick to the top of the board (side not shown here) when taping it off last night, and I got pretty frustrated with it. not sure if there was too much humidity or what, but after three tries to tape off the board, I gave up. so this was done by free lapping it, which is a bit messier looking, but you won't be able to tell in the red or grey, just the clearish area in back. Regardless, I'm super pumped on how this looks!

Looks like I bumped my head and bled everywhere


 And I also modeled this board in Solidworks, and tested out the colors I like on it. Here's a couple pics! Psyched on how this came out and that I can do this in Solidworks now! This is the side view obviously

 Top view

And some perspective

Sunday, May 27, 2012

Marilyn's board almost done!


I have not been posting on Marilyn's board at all, so here's some catch up. Last we left off that I had the cloth cut and the board ready to be glassed on the bottom. I practiced first on a handplane to do this type of color work while glassing because i'd never done this type of design in teh color. Psyched I practiced, as that one practice helped alot. Marilyn and Mel both helped me glass the bottom, as I was intimidated to do it by myself and get it all done before the epoxy gelled. It came out great! Marilyn was pumped, and so was I. We wrapped the rails with a cut lap, and then once it gelled, cut it off at the tape line, to have a nice line where the green cloth ended on top of the board. see below

 Bottom of the board, looking great! this was a design modeled after a leaf that Marilyn at their place, and it came out pretty awesome, thanks to the help from Marilyn and Mel!

 Top of the board, with the cutlap cut. Looking good too! My cut lines weren't perfect though, so pinlines are needed to hide the shakiness of my cut lines. Again, never done those, so psyched to try it out.

 I glassed the top of the board by myself (no colors involved here, so a bit easier to handle) and it came out super good too. psyched I did it all in time, and with some to spare. you feel high or something when you do a good glassing job, i like it. This above photo is after I hotcoated the board. This is where you just paint clear epoxy over the glass job you already did to smooth it all out. "don't even touch barney! that's a fresh hotcoat!"

 Then i mounted in the fin box for the board. I used a spare fin i have to put it into the fin box, and have a reference to make sure it is perfectly vertical and the box is therefore in perfect also. The epoxy has a property where the larger the volume, the quicker and hotter the reaction takes place when it starts to harden. So the issue here is that you carve out this rectangular hole in the board to mount the fin box into, and then pur epoxy in, push in the fin box, and get it aligned and everything while it cures. There's horrow stories of guys melting the foam inside the board some when doing this, because of the exothermic reaction that takes place, so a trick is to hold an ice bag against the opposite side of the board, to keep it cool. You can't see it, but that what the duct tape is doing there- holding an ice bag against the bottom of the board while the epoxy cures. I also have an air pump, for air mattresses, sitting on the board running as this creates some vibration throughout the board, and if there are any bubbles down in the epoxy, it helps them rise up to the surface and pop, and then there's no potential air pockets or anything anywhere. I've seen this done with other stuff, but not too sure how much it helped here.
I just masked off the top of the board and painted on the pinlines to hide the cutlap line. I've never done this, so hopefully it comes out well. I used tinted epoxy resin and painted it on. Once it starts to gel, you pull the tape and it should be a clean line, as long as you pull the tape at the right time..... hope i do that.